7 Repair Station Manual Mistakes That Delay FAA Acceptance
For most Part 145 applicants, the longest part of certification isn't building the shop. It's the back-and-forth over the manuals. Every resubmission of a Repair Station Manual (RSM) or Quality Control Manual (QCM) adds weeks. Most of those resubmissions come from the same handful of mistakes. Here are the seven we see most often, and how to avoid them.
1. Using a template that doesn't describe your shop
A purchased or borrowed manual is tempting, but the FAA reviews your manual against your actual operation. Procedures for tools you don't own, departments you don't have, or ratings you aren't applying for are a red flag, and so is a manual that names another company in the headers. Inspectors will check that what is written is what happens. Write the manual around your own facility, people and workflow from page one.
2. Missing one of the required RSM sections
14 CFR 145.209 lists what the RSM must contain, from an organizational chart with each management position's duties and authority, through procedures for the rosters, capability list, training program revisions, work at another location, contract maintenance and recordkeeping, to a system for identifying and controlling manual sections. Leaving out even one item, or folding it into a vague paragraph, generates a finding. Build a cross-reference matrix that maps every paragraph of 145.209 to the page where you address it, and include it with your submittal.
3. A QCM that skips required procedures
Under 145.211(c), the QCM must describe your system for incoming material inspection, preliminary inspection, inspecting articles involved in an accident for hidden damage, inspector proficiency, keeping technical data current, qualifying and surveilling noncertificated persons, final inspection and return to service, calibration (including intervals), and corrective action. It must also reference manufacturer inspection standards where applicable, include or reference your forms, and explain how the QCM is revised. Hidden-damage inspection and surveillance of noncertificated persons are the two most often forgotten.
4. Revision procedures that don't say how often the FAA is notified
Several sections of Part 145 require you to describe not only how a document is revised, but how and how often your responsible Flight Standards office is notified. That applies to the RSM itself, the QCM, the capability list and contract maintenance information. Training program revisions go a step further: they must be submitted for FAA approval. "Revisions will be sent to the FAA as needed" is not a procedure. State the method and the frequency.
5. RSM, QCM, training manual and forms that contradict each other
The RSM says the Chief Inspector approves the capability list; the QCM says the Accountable Manager does. The training manual requires a form the forms manual doesn't contain. These inconsistencies are easy to create when manuals are written by different people at different times, and inspectors notice them. Assign every responsibility to one position and use the same position titles and form numbers everywhere.
6. A capability list the shop can't support
Under 145.215, an article can only go on the capability list after a documented self-evaluation shows you have the housing, facilities, equipment, material, technical data, processes and trained personnel to do the work. Listing articles "for the future" without that evaluation, or without current manufacturer data, is a common reason applications stall. Start with what you can support today and add articles using your self-evaluation procedure.
7. Writing for the FAA instead of for your technicians
A manual stuffed with regulatory language may read as thorough, but if your technicians and inspectors can't follow it, you won't comply with it, and the FAA's performance assessment will show that. Good manuals say who does what, when, and on which form, in plain English. Write procedures that your newest technician could follow on the shop floor.
Use the FAA's own guidance
AC 145-9A, Guide for Developing and Evaluating Repair Station and Quality Control Manuals, is the FAA's guidance for exactly this work. Inspectors use it when reviewing your submittal, so writing to it from the start removes a lot of guesswork.
Get your manuals right the first time
AMC writes Repair Station and Quality Control Manuals tailored to your operation, with a cross-reference matrix to Part 145 and AC 145-9A, and supports you through FAA comment resolution. Already have manuals? A gap analysis will show you what needs fixing before the FAA does.
